



Laadbaktemperatuur boven het vriespunt nieuw Renault Master 2.2 DCI Diesel
Urgent- 17.22 M³
- handgeschakeld
- 3 zitplaatsen
- Gdańsk
- Garantie 24 maanden
Belangrijkste informatie
|
|
---|---|
Materiaalgarantie
|
|
Websiteref.: | 10699635 |
Carrosserie | Koelwagen |
Onder carrosserie | Laadbaktemperatuur boven het vriespunt |
Merk | Renault |
Type (merk : Renault) | Master |
Model | 2.2 DCI |
Staat | Nieuw |
Datum eerste registratie | -- |
Materiaalgarantie | Ja |
Garantieduur | 24 maanden |
Land | POLEN |
Fabrikant | Renault |
Specificaties Renault Master |
|
---|---|
Assen | 4x2 |
Land (type) | POLEN |
Kilometerstand | 12 Km |
Besturing | Stuur aan de linkerkant |
Euronormen | Renault Euro 6 |
Afmetingen van de laadbak |
|
---|---|
Hoogte laadruimte | 2.0 meter |
Breedte binnenlaadruimte | 2.05 meter |
Lengte binnenlaadruimte | 4.2 meter |
Afmetingen |
|
---|---|
Volume | 17.22 m³ |
Oppervlak | 8.61 m2 |
Aantal ton |
|
---|---|
Toegestaan maximum gewicht | 3.5 Ton |
Hulpstukken Renault bedrijfswagen |
|
---|---|
|
Staat van het voertuig |
|
---|---|
Energie | Diesel |
ATP keuring |
---|
|
Overige informatie Renault 2.2 DCI |
|
---|---|
Versnellingsbak | handgeschakeld |
CO2-uitstoot | 347 g/km |
Aantal zitplaatsen | 3 |
Type koelunit | Elektrisch |
Motor |
|
---|---|
Vermogen | 170 PK |
Motorvermogen | 125 kW |
Cilinderinhoud | 1997 cm3 |
Accessoires cabine |
---|
|
Opmerkingen |
---|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
Alles zien
|
Opmerkingen |
---|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
Belangrijkste informatie
|
|
---|---|
Materiaalgarantie
|
|
Websiteref.: | 10699635 |
Carrosserie | Koelwagen |
Onder carrosserie | Laadbaktemperatuur boven het vriespunt |
Merk | Renault |
Type (merk : Renault) | Master |
Model | 2.2 DCI |
Staat | Nieuw |
Datum eerste registratie | -- |
Materiaalgarantie | Ja |
Garantieduur | 24 maanden |
Land | POLEN |
Fabrikant | Renault |
Specificaties Renault Master |
|
---|---|
Assen | 4x2 |
Land (type) | POLEN |
Kilometerstand | 12 Km |
Besturing | Stuur aan de linkerkant |
Euronormen | Renault Euro 6 |
Afmetingen van de laadbak |
|
---|---|
Hoogte laadruimte | 2.0 meter |
Breedte binnenlaadruimte | 2.05 meter |
Lengte binnenlaadruimte | 4.2 meter |
Afmetingen |
|
---|---|
Volume | 17.22 m³ |
Oppervlak | 8.61 m2 |
Aantal ton |
|
---|---|
Toegestaan maximum gewicht | 3.5 Ton |
Hulpstukken Renault bedrijfswagen |
|
---|---|
|
Staat van het voertuig |
|
---|---|
Energie | Diesel |
ATP keuring |
---|
|
Overige informatie Renault 2.2 DCI |
|
---|---|
Versnellingsbak | handgeschakeld |
CO2-uitstoot | 347 g/km |
Aantal zitplaatsen | 3 |
Type koelunit | Elektrisch |
Motor |
|
---|---|
Vermogen | 170 PK |
Motorvermogen | 125 kW |
Cilinderinhoud | 1997 cm3 |
Accessoires cabine |
---|
|
Opmerkingen |
---|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
Alles zien
|
Opmerkingen |
---|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |

Koelwagen Iveco Daily 35C15

Laadbaktemperatuur onder het vriespunt Renault Master

Laadbaktemperatuur onder het vriespunt Renault Master 130.35

Koelwagen Renault Traffic Furgon Cooler Isoterma, Long, One Owner
