Open bakwagen nieuw Iveco Daily 70C18 Diesel kraan
Urgent- 5 M³
- 7 Ton
- Gdańsk
|
Belangrijkste informatie
|
|
|---|---|
| Websiteref.: | 10664437 |
| Carrosserie | Open bakwagen |
| Merk | Iveco |
| Type (merk : Iveco) | Daily |
| Model | 70C18 |
| Staat | Nieuw |
| Datum eerste registratie | 16/07/2026 |
| Land | POLEN |
| Fabrikant | Iveco |
Staat van het voertuig |
|
|---|---|
| Energie | Diesel |
| Land (type) | POLEN |
Hulpkraan |
|
|---|---|
| |
| Hefcapaciteit bij giekpunt | 1.12 Ton |
| Laadvermogen | 2700 Kg |
| Werkradius | 3.6 meter |
Ophanging / Assen |
|
|---|---|
| Assen | 4x2 |
Motor |
|
|---|---|
| Vermogen | 176 PK |
| Cilinderinhoud | 2998 cm3 |
Afmetingen |
|
|---|---|
| Oppervlak | 8.15 m2 |
| Volume | 5 m³ |
Hulpstukken Iveco bedrijfswagen |
|
|---|---|
|
Overige informatie Iveco 70C18 |
|---|
|
Specificaties Iveco Daily - Hijskraan |
|
|---|---|
| Besturing | Stuur aan de linkerkant |
| Euronormen | Iveco Euro 6 |
| Kilometerstand | 16 Km |
| Tankinhoud | 115 L |
Afmetingen van de laadbak |
|
|---|---|
| Hoogte binnenlaadruimte | 0.6 meter |
| Breedte binnenlaadruimte | 2.25 meter |
| Lengte binnenlaadruimte | 3.62 meter |
Versnellingsbak en transmissie |
|
|---|---|
| Versnellingsbak | handgeschakeld |
Aantal ton |
|
|---|---|
| Totaal beladen gewicht | 7 Ton |
Accessoires cabine |
|---|
|
Opmerkingen |
|---|
|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
|
Alles zien
|
Opmerkingen |
|---|
|
dump truck + crane, brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
|
Belangrijkste informatie
|
|
|---|---|
| Websiteref.: | 10664437 |
| Carrosserie | Open bakwagen |
| Merk | Iveco |
| Type (merk : Iveco) | Daily |
| Model | 70C18 |
| Staat | Nieuw |
| Datum eerste registratie | 16/07/2026 |
| Land | POLEN |
| Fabrikant | Iveco |
Staat van het voertuig |
|
|---|---|
| Energie | Diesel |
| Land (type) | POLEN |
Hulpkraan |
|
|---|---|
| |
| Hefcapaciteit bij giekpunt | 1.12 Ton |
| Laadvermogen | 2700 Kg |
| Werkradius | 3.6 meter |
Ophanging / Assen |
|
|---|---|
| Assen | 4x2 |
Motor |
|
|---|---|
| Vermogen | 176 PK |
| Cilinderinhoud | 2998 cm3 |
Afmetingen |
|
|---|---|
| Oppervlak | 8.15 m2 |
| Volume | 5 m³ |
Hulpstukken Iveco bedrijfswagen |
|
|---|---|
|
Overige informatie Iveco 70C18 |
|---|
|
Specificaties Iveco Daily - Hijskraan |
|
|---|---|
| Besturing | Stuur aan de linkerkant |
| Euronormen | Iveco Euro 6 |
| Kilometerstand | 16 Km |
| Tankinhoud | 115 L |
Afmetingen van de laadbak |
|
|---|---|
| Hoogte binnenlaadruimte | 0.6 meter |
| Breedte binnenlaadruimte | 2.25 meter |
| Lengte binnenlaadruimte | 3.62 meter |
Versnellingsbak en transmissie |
|
|---|---|
| Versnellingsbak | handgeschakeld |
Aantal ton |
|
|---|---|
| Totaal beladen gewicht | 7 Ton |
Accessoires cabine |
|---|
|
Opmerkingen |
|---|
|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
|
Alles zien
|
Opmerkingen |
|---|
|
dump truck + crane, brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
Open bakwagen Peugeot BOXER / 2,2 HDi / 140 KM / WYWROTKA / 72 000 KM
Open bakwagen Ford TRANSIT
Standaard Ford Transit 100T350
Open bakwagen Renault Master